EastSideSquirrel
Member
Good day everyone. I was musing about in some E-Plan videos, and saw that they were using panduit panelmax. I guess if you were in a pinch for panel space it could be good?
http://www.panduit.com/ccurl/120/778/panelmax-din-rail-duct-wdcb29,0.pdf
I was speaking with one of my colleagues, and besides the increased depth of the panel, it could lend itself to frustration in troubleshooting for maintenance or cause issues with having to bend the wires straight down right after the component.
I searched the site and there have only been two forum mentions, one from 2004 & from 2009. There has got to be a few of you who have used it since then.
Has anyone used this stuff before and if so, what has your experience been?
Thanks.
http://www.panduit.com/ccurl/120/778/panelmax-din-rail-duct-wdcb29,0.pdf
I was speaking with one of my colleagues, and besides the increased depth of the panel, it could lend itself to frustration in troubleshooting for maintenance or cause issues with having to bend the wires straight down right after the component.
I searched the site and there have only been two forum mentions, one from 2004 & from 2009. There has got to be a few of you who have used it since then.
Has anyone used this stuff before and if so, what has your experience been?
Thanks.