marcinski
Member
Hey guys,
I hope someone can help me with little issue i encountered today.
I needed to modify applicaton on existing panelview component part # 2711C-T10C Ser B date 2012/09/06, so i transfered *.cha file from PV to my computer and inported to CCW Ver. 4.00.00 (standard edition) and did all necesary changes, validated app, Buld succeeded and exported to *.cha file.
I was able to transfer file from my computer to internal memory of HMI and as soon as i tried to run it this message came on:
Application will not run for the following reasons:
Application was created using a different platform release.
Why is this message coming up since CCW supports panelview component and you can create/modify applications offline without need to be connected to HMI via ethernet.
Is there something i'm missing.
Thank You for help
I hope someone can help me with little issue i encountered today.
I needed to modify applicaton on existing panelview component part # 2711C-T10C Ser B date 2012/09/06, so i transfered *.cha file from PV to my computer and inported to CCW Ver. 4.00.00 (standard edition) and did all necesary changes, validated app, Buld succeeded and exported to *.cha file.
I was able to transfer file from my computer to internal memory of HMI and as soon as i tried to run it this message came on:
Application will not run for the following reasons:
Application was created using a different platform release.
Why is this message coming up since CCW supports panelview component and you can create/modify applications offline without need to be connected to HMI via ethernet.
Is there something i'm missing.
Thank You for help