joeparrish
Member
Ok I have an Allen Bradley Panel view 550 cat 2711-t5a5L1 ser b
I want to be able to display a counter on the screen
but it is mutipling every thing by 2
if the counter is at 2 it reads 22 3 reads 33 ect
I used a numeric data desplay
tag address c5:0.acc data type is an unisigned integer
can anyone help
I want to be able to display a counter on the screen
but it is mutipling every thing by 2
if the counter is at 2 it reads 22 3 reads 33 ect
I used a numeric data desplay
tag address c5:0.acc data type is an unisigned integer
can anyone help