sanjujamkar
Member
Hello All,
I am facing weird issue in Panelview Plus 7 HMI.
Showing '/' instad of '.' for floating point values. for example my actual value is 0.06 but in HMI showing 00/06.
Same problem is with keypad, when i trying to enter set point, keypad is not showing '.' and it is showing '/' instead of '.'
When checked in Device input in Terminal settings, there also keypad showing '/' only.
I have another similar HMI, checked on that and it is showing everything normal.
Both HMI having same firmware version of 2.50.0.0.
Is there any settings in HMI to change it from '/' to '.'
Attached are the screen shots of the same.
Request experts to help me to resolve this issue.
I am facing weird issue in Panelview Plus 7 HMI.
Showing '/' instad of '.' for floating point values. for example my actual value is 0.06 but in HMI showing 00/06.
Same problem is with keypad, when i trying to enter set point, keypad is not showing '.' and it is showing '/' instead of '.'
When checked in Device input in Terminal settings, there also keypad showing '/' only.
I have another similar HMI, checked on that and it is showing everything normal.
Both HMI having same firmware version of 2.50.0.0.
Is there any settings in HMI to change it from '/' to '.'
Attached are the screen shots of the same.
Request experts to help me to resolve this issue.