Hojland Member H Join Date Oct 2006 Location Langå Posts 203 Jan 22, 2021 #1 Is there a way to see if anyone is using the vnc server, on a panelview plus. I do not want the machine to be started remotely
Is there a way to see if anyone is using the vnc server, on a panelview plus. I do not want the machine to be started remotely
MarkNightingale Lifetime Supporting Member + Moderator M Join Date Sep 2010 Location In The VAT Shed Posts 741 Jan 22, 2021 #2 You can set the VNC up to be read only. Cheers Mark
Hojland Member OP H Join Date Oct 2006 Location Langå Posts 203 Jan 22, 2021 #3 But If I do that, then I guess that I can not change display
rupej Member R Join Date Sep 2014 Location NC Posts 967 Jan 22, 2021 #4 I'm pretty sure it will still allow display changes in read only mode if you're not controlling that from the PLC.
I'm pretty sure it will still allow display changes in read only mode if you're not controlling that from the PLC.
_Dock_ Member D Join Date Sep 2015 Location KY Posts 508 Jan 22, 2021 #5 You could always do hardwired start/stop/jog buttons and allow full control over the hmi, that way motion can’t be initiated from the hmi.
You could always do hardwired start/stop/jog buttons and allow full control over the hmi, that way motion can’t be initiated from the hmi.