Cord
Guest
C
I'm trying to make the PLC change the screen on a panelview 1400e on a controlnet highway.
Tom Jenkins said:As fer as I'm concerned, the 1400e and the "enhnaced" software are ****, and even more over-priced than the norm fer thet perticular manufacturer.
That explains why I had trouble finding a compatible protocol for my SLC...Allen Nelson said:AB never really expected the two lines to merge - SLCs were DH-485 based, PLC-5s DH+. They used the same R I/O protocol, and you could buy modules that might (repeat, might) allow communication between them, but they were positioned for seperate markets and different end-users.
On the touchscreen model, touch cells are about the SIZE of dinosaurs. There's not much room for a CRT in most enclosures, either. I'm sure the PV1000 sells much better than the PV1400e.Now the PV 550/900/1000 are the ones that everyone uses (and come in all flavors of communication protocols, not just DH-485), and the 1400e's are dinosaurs.
93lt1 said:akreel-
There is a PV 1000e thats about the same size as a 1000 non-"e"