PCS7 Communication With S7 300/1200 PLC using IEC 60870-5-105 protocol through GPRS.

rahilansari

Member
R
Join Date
Jul 2008
Location
INDIA
Posts
103
Dear All

As I mentioned in the subject I want to know what is required on the PCS 7 both hardware and software aspects also for S7 300/S7 1200 PLC systems to establish communication using IEC 60870-5-104 protocol and medium should be used is GPRS.

Thanks in Advance.
Rahil
 

Similar Topics

A
T3000 <-> PCS7 communication
Hi, Anybody can tell me which is the best way to interchange variables between T3000 and PCS7? Is it possible to stablish a S7 connection? Best...
Replies
1
Views
1,824
boneless
boneless
K
WinCC PCS7 Communication ?
We have a multi node PCS7 installation and lately we had a problem when we downloaded a new project to one of Wincc OSs . WinCC can only...
Replies
0
Views
1,477
kytomatic
K
E
PCS7 communication problem
Hi every body I have problem with PCS7 communication, and it is briefed as follows The PCS7 ver 5.2 is used to interface with ET200M about 3 to...
Replies
4
Views
6,718
nif
nif
A
MODBUS MASTER/SLAVE PCS7 9.1 SP1
Does anyone have an example project of the cm ptp ET200 SP HA with 410-5H DCS (PCs7 9.1 SP1) for MODBUS MASTER/SLAVE communication ?
Replies
2
Views
128
Arun Kumar Yadav
A
F
TIA Portal installation with PCS7
Hello, Is there a sequence when installing both TIA Portal and PCS7 in the same PC? First TIA and then PCS7 or viceversa? Thanks in advance.
Replies
0
Views
484
Facu2998
F
Back
Top Bottom