PF4 Modbus Comms Cable

robw53

Member
robw53
Join Date
Nov 2009
Location
south yorks
Posts
515
i am looking to wire up my 5 PF4's on my home test rig on modbus i have the RJ45 plugs from AB and want to know what type of cable to use, i have had a look and crnt find much info, i have looked through the RS book and think maybe the belden 9463?

anyone any advice
 

Similar Topics

T
Swapping a PF4/40 for PF525
Hi. I have been tasked to update a plc project for my work. Currently, the project is controllogix platform and controlling several drives. The...
Replies
2
Views
1,671
tarik1978
T
C
PF4 on single phase?
I was wondering if anyone could walk me through how to properly connect a 480v 3phase PF4 to 110v single phase. I am doing some final testing to...
Replies
7
Views
2,692
Jeff23spl
J
P
Modbus AOI Data transfer
Hello Everyone, I am using a raC_Opr_NetModbusTCPClient AOI module, as below,. So, I need some assistance to restrict in reducing the poling...
Replies
2
Views
110
parithielam15
P
R
Issue with mitsubushi melsec PLC modbus QJ71MT91
I want to communicate my Q series PLC with Factory IO using GX works 2 software, I want to use modbus as server and the ips are as follows plc...
Replies
0
Views
76
raheelredben
R
F
Modbus TCP communication
Hi folks, I have a Controllogix in communication with a zigbee coordinator using Logix AIO for modbus tcp. This zigbee coordinator have 3 slaves...
Replies
10
Views
341
Contr_Conn
Contr_Conn
Back
Top Bottom