Well, I guess I've been exposed!
The specific problem I'm having with this circuit is as follows:
I am attempting to use a PE that is on when light is received. I would like to shut of a motor when the PE is blocked (off) for a predetermined time interval and then return power to the motor as soon as the PE resumes an ON state. The way in which I am trying to do this is by using a 120vac PE that outputs to a OFF Delay Relay which in turn switches the motor power circuit. I'm not sure if the relay will work properly with 120v applied at the switch as opposed to a dry contact. I have attached a drawing depicting how I am currently connected. This is not working.
Thanks for helping out.
The specific problem I'm having with this circuit is as follows:
I am attempting to use a PE that is on when light is received. I would like to shut of a motor when the PE is blocked (off) for a predetermined time interval and then return power to the motor as soon as the PE resumes an ON state. The way in which I am trying to do this is by using a 120vac PE that outputs to a OFF Delay Relay which in turn switches the motor power circuit. I'm not sure if the relay will work properly with 120v applied at the switch as opposed to a dry contact. I have attached a drawing depicting how I am currently connected. This is not working.
Thanks for helping out.