prakasha
Member
Hi All,
My parameter passing is not working for Plant-PAX (RA-LBSM) Phase-Plate.
I am trying it in emulator 24V, Phase Plate is opening when click the button but non of buttons are working with the Phase CMD like START, HOLD, ABORT,STOP,RESET.. I am struggling since so many days I am not getting where I am doing mistake. kindly help to come out from this..
Display (RA-LBSM) Phase-Faceplate /T{::[PlantPAX1]_LBSMUnit[1]},::[PlantPAX1],9,Slurry_Preparation - This is format I have entered in the Touch Release Action.
My parameter passing is not working for Plant-PAX (RA-LBSM) Phase-Plate.
I am trying it in emulator 24V, Phase Plate is opening when click the button but non of buttons are working with the Phase CMD like START, HOLD, ABORT,STOP,RESET.. I am struggling since so many days I am not getting where I am doing mistake. kindly help to come out from this..
Display (RA-LBSM) Phase-Faceplate /T{::[PlantPAX1]_LBSMUnit[1]},::[PlantPAX1],9,Slurry_Preparation - This is format I have entered in the Touch Release Action.
Last edited: