warrensr64
Member
I have and old computer running controlview300 in dos. I’m try to update to rsview32. But the question I have now is getting communication working in rslinx and new computer. We have a plc-5/30 and a 1784-pktx pci card. I am trying to set up dh+ communication but it is not working. The communication light is flashing green on the card. But on the plc the A light stops flashing green(no green light no red light) when I plug in the cable. The Baud rate is 57.6k. I think that is the only setting on the old 62pin isa card I have tried a Pentium 1 computer and Pentium 4 computer. Tried rslinx 2.54, 2.55, 3.7, 3.9. I have communicated with the plc over the serial connection to get the program. I’m a newbie to plc’s and Dh+.