PLC HORNER CANOPEN integration

chris18136

Member
C
Join Date
Sep 2019
Location
coatzacoalcos
Posts
7
Hi somebody has integrated a sensor in CanOpen protocol in The plc horner?
I want to integrate a Inclinometer but I don't know how to read it.
I already loaded the EDS.

Thanks
 

Similar Topics

D
Reset PLC Horner?
I was loading a program onto an XE1e2 PLC and it got stuck on these two windows and won't progress. It won't let me connect from the PC to reload...
Replies
0
Views
74
Data_name
D
D
Plc Horner Modbus Error
I am having a problem communicating my PLC with Drive via Modbus connection. I start by opening the port and there is no problem, but then when I...
Replies
6
Views
212
Data_name
D
A
Horner XL7 PLC and Eaton MMX VFD Control signal issue.
Hello, I’m new to this forum and if I’m posting incorrectly let me know. I’ve been having an issue I can’t seem to figure out. I’m sure it’s...
Replies
1
Views
124
bkottaras
B
L
Force Screen or Switch Screen on Horner plc
I am using Cscape 9.9 service pack 8. I am writing my program as a variable based program not register based. When I try and have the output...
Replies
1
Views
839
Gene Bond
G
G
Horner PLC and Cscape ascii string to value help
I have a Horner PLC that is reading Ascii string from a device. When the device responds, it responds with the hex value in Ascii. I need to...
Replies
8
Views
2,383
drbitboy
drbitboy
Back
Top Bottom