The problem is your programming method. There are no steps, no progress. Other problem source is the using set and reset instructions. Avoid these if it is possibile. Make a state machine, otherwise you just will waste your time with countinous debugging every day.
PLC is ignoring inputs (only sometimes). Kinco CPU506. Help me solve this please
- Thread starter RogueFab
- Start date
Similar Topics
The past week we received a new piece of equipment from Germany which utilizes siemens controls. Typically in our company we use A.B. controls for...
the conveyor can stop because of a safety sensor or safety switch. And also it can stop because of an object jam detector sensor. If the conveyor...
Good Day to all of you, this is my first post, i will try to explain as best as possible, english is not my natural language. I am performing an...
Hi All,
Someone at work has put a PLC system on my desk, that's just been taken off an idle production line.
He said "It's an S7 PLC. We don't...
I have a project to automate four generator sets. The system will monitor and store the load demand of the factory. Once there's Power outage, the...