plc swap in your favor

ganutenator

Lifetime Supporting Member
ganutenator
Join Date
May 2002
Location
kansas
Posts
1,440
I have three sites w/ the M340 BMX P34 20102 series plcs. Since we no longer use a servo inside our inbay automatic car washes and don't need can open on our processor, we have since standardized on the M340 1000 series. I would like to exchange these three beastly plcs, for the lower model M340 1000's. Anyone interested in a swap?

I actually love the M340 plc and the Unity programming language by the way (other than the EBOOLs)
 

Similar Topics

S
Modicon Quantum PLC swap question
I have a backup Processor which is identical to the processor running my plant (140 CPU 652 60). If I load the same project into this backup...
Replies
1
Views
1,518
V0N_hydro
V
S
PLC battery hot-swap
Folks, We have a black-box provided by a vendor that we maintain. Inside the box, there is a Modicon TSX Micro 3722 PLC. On the front panel of...
Replies
5
Views
6,882
Jim Dungar
J
Ken Roach
Byte Swap in PLC-5
I'm writing a PLC-5 program that receives a barcode string over DH+ that ends up in an Integer register in the controller. The challenge is that...
Replies
5
Views
4,594
Ken Roach
Ken Roach
C
0-20mV Loadcell with 2080-TC card Micro850 PLC
Hi everyone. I'm trying to read values from a Loadcell with a 2080-TC card. I know the 2080-TC is a thermocouple card but it reads millivolts that...
Replies
4
Views
66
chikhim
C
P
Looking for a personal PLC tutor, should I post in the PLC job ad section
Hello All, Please direct me to post to the right page. I am really new to PLC, and want to find a tutor who is familiar with Automation Direct's...
Replies
3
Views
81
Levi G
L
Back
Top Bottom