plc

[hkamin511]

After replacing analog i/p card what is next step in plc?

 

[TimWilborne]

What is the problem you are having?

 

[hkamin511]

Plc

After replacing analog i/p card what is next step in plc

 

[hkamin511]

Question for test.

 

[TimWilborne]

Give it the smoke test?

 

[pacifico]

Ebay the dead one. Make sure to say "Removed from working machine" in the description.

 

[Clay B.]

Turn the power to the PLC on and see if it destroys this card also.

 

[harryting]

We only do multiple choice questions

 

[TimWilborne]

We only do multiple choice questions

I always choose C when I don't know the answer

 

[RussB]

After replacing analog i/p card what is next step in plc

Replace the sensor?

 

[TimWilborne]

Replace the sensor?

Wouldn't you replace the sensor first?

 

[OZEE]

Why are you replacing the analog i/p card?
Have you tried searching the forum yet? (If so, you'd have learned that we don't do your homework...)
Why haven't you read the book yet?
Why don't you ask your instructor or pay attention in class?

You see... the homework/test is NEVER over material that you weren't supposed to have already learned in class.

 

[danw]

After replacing analog i/p card what is next step in plc

 

[TimWilborne]

What type of step programming is that? I'm most familiar with sequencers and bit logic methods of step programming

 

[MorphuisOGrady]

Connect the Mains to Channel 1 and that's it job done. Hope this helps...