PLC5/25 Program download to EPROM problem

nautical

Member
N
Join Date
Jul 2006
Location
Hong Kong
Posts
26
Dear Messes,

I had a stupid question about downloading program to the PLC5/25 and every time I tried to download program to EPROM, it keeps on tell me that the memory is too small or cannot write to EPROM.

If anyone face this problem before or if I miss somthing on config the CPU!??


Thanks for your kindly assistances in advances.

Best Rgds.,
 

Similar Topics

V
Which cable I can use for upload/download program from PLC5/20
dear all, I have question, i realy need to help from everyone. Which cable I can use for upload/download program from PLC5/20 to Computer...
Replies
4
Views
2,144
Mickey
Mickey
W
How to download a new program to PLC5/40
I have a plc5/40e is running a different project's program, now I try to download a different project's program. but it tell me that" cannot get...
Replies
5
Views
4,742
OkiePC
OkiePC
ptine
Trying unsuccessfully to download a new program into a PLC5/30
I have a PLC5/30 at home that I am playing/learning with. I have exhausted my enthusiam to try to download a new program (from work) into the...
2
Replies
27
Views
10,584
rPraveenkum
rPraveenkum
V
PLC5 program control, does .tt or .dn get reset
Plant PLC has no reasonable stop start sequencer. There is 3 states, Available, Start & Stop. A 10 sec timer exists in the Stop Ladder that is...
Replies
8
Views
2,702
vibbo
V
BachPhi
Looking for someone to convert PLC2 program to PLC5
It's a PLC2/30 system, besides the regular I/O, it has a 1771-VHSC, 1771-KA2, and 1771-KE. You can PM me. TIA.
Replies
1
Views
1,533
GaryS
G
Back
Top Bottom