PLC5 Profibus adapter Configuration

[kreskin]

Hi All, got an issue with a PLC5 Profibus adapter card and it looks as though I need some legacy software (Local Station Manager) to configure the card.

I am aware that the PLC5 platform is no longer supported by RA, but wondered if anyone out there would know where I could locate this application? Or maybe an alternative?

The card is a 1785-PFB B (Rev B01) f/w Rev A

 

[L33er]

If you are lucky, the infamous DcCooper may have it

http://www.plctalk.net/qanda/showthread.php?t=64743

 

[kreskin]

If you are lucky, the infamous DcCooper may have it

http://www.plctalk.net/qanda/showthread.php?t=64743

Thanks very much my friend, not sure when DcCooper was last seen, but it looks like he had a similar problem to the one I have, and would assume that he may have the application I am looking for.

 

[ASF]

Thanks very much my friend, not sure when DcCooper was last seen...

From memory, he was last seen in November 1971, rapidly descending from a Boeing 727?

 

[Steve Bailey]

From memory, he was last seen in November 1971, rapidly descending from a Boeing 727?

That was D B Cooper, probably not the same person as dcooper33. I always hoped that at the end of Twin Peaks, agent Dale Cooper would turn out to be D B Cooper.

 

[ASF]

That was D B Cooper, probably not the same person as dcooper33.

I dunno, has anyone ever seen the two of them in a room together? *squints suspiciously*