narcilla
Member
Maybe someone in this forum has encountered this and could offer some suggestion.
We connected a 1746-NI4 via 1747-ASB to a PLC5/80 on Ch1B Remote I/O 57.6K speed. The 4 analog values are to be read by a BTR instruction. With the instruction XIO BT9:7/EN BTR... the EN bit gets stuck and the BTR DONE bit never gets active. Is there any Remote IO diagnostic facility in the RSLogix 5 software to enable checking where the problem is coming from? Thanks for any help.
We connected a 1746-NI4 via 1747-ASB to a PLC5/80 on Ch1B Remote I/O 57.6K speed. The 4 analog values are to be read by a BTR instruction. With the instruction XIO BT9:7/EN BTR... the EN bit gets stuck and the BTR DONE bit never gets active. Is there any Remote IO diagnostic facility in the RSLogix 5 software to enable checking where the problem is coming from? Thanks for any help.