jebrietszkie
Member
- Join Date
- Apr 2003
- Posts
- 8
I would just like to know if the DC ouput of PLC can drive or program the desired speed of motor at lower speed but higher torque?
Can you give me some ideas on how do I going to use the PLC to diplay the ambient temperature from a certain design circuit that input the desired temperature?
In addition, I also have a propose project that can display the digital time and date using PLC and my problem is that there are about a maximum of 70 segments that should be lighten up, what is the right design to do this project?
By the way our project is a fabrication of an electromechanical billboard with the digital time ,date, and ambient temperature display
THANK YOU !!!!!!
JEBRIETSZKIE
Can you give me some ideas on how do I going to use the PLC to diplay the ambient temperature from a certain design circuit that input the desired temperature?
In addition, I also have a propose project that can display the digital time and date using PLC and my problem is that there are about a maximum of 70 segments that should be lighten up, what is the right design to do this project?
By the way our project is a fabrication of an electromechanical billboard with the digital time ,date, and ambient temperature display
THANK YOU !!!!!!
JEBRIETSZKIE