I have an open topped bin that contains a powdered product. The bin is a buffer within a production line and currently is not monitored other than visually. We are having some level sensors fitted to the bin that will give an analogue signal to indicate level within the bin at 12 known points. I would like to display this information graphically via the HMI for the operators to be aware of the current state of the buffer.
My first idea is to use 12 bargraphs side by side to give a crude representation. Eg,
I believe this would work, but wouldn't be ideal as it would look very "blocky".
Is there a way to plot individual points and create a line graph as this would look much neater. Eg,
(Same points plotted)
As mentioned in the title, I would like to display this on a PV+1000 but am unsure if it is possible.
Any advice would be warmly received.
My first idea is to use 12 bargraphs side by side to give a crude representation. Eg,
I believe this would work, but wouldn't be ideal as it would look very "blocky".
Is there a way to plot individual points and create a line graph as this would look much neater. Eg,
(Same points plotted)
As mentioned in the title, I would like to display this on a PV+1000 but am unsure if it is possible.
Any advice would be warmly received.
Last edited: