PMX4740 Schneider Modicon
- Thread starter peterc
- Start date
Jim Dungar
Member
This sounds like one of Schneider Electric's Telemecanique brand of controller. The product line is the TSX47 family. The PMX is a controller with advanced process control functions.
I do not know what software was used to program the TSX47 family, but I know it is not a current product.
I do not know what software was used to program the TSX47 family, but I know it is not a current product.
Gizmir
Member
You're right. It's no more a current product and it's the process control specialized CPU of the TSX family. To program it, you need XTEL software but this is an old one too running under OS2 operating system (not windows), I'm not sure you can still buy it.
Similar Topics
Hi,
Is Control Expert V15.0 supposed to support multiple monitors?
I'm running Control Expert V15.0 on my host Windows 11 PC, connected to two...
Everything was working fine, but suddenly CPU went into error mode, and the ERR and TER LEDs lit up. Now I can't download or connect with the PLC...
Hello all,
I am wanting to update the system clock via NTP in the M580/M340.
I'm aware that we are able to connect to a NTP in the controller...
I am using Schneider elau pack drive servo motor ISH-100.
I am facing the problem that On the ISH -100 red light is blinking and pack drive C-600...
Hello, As part of our project, we are using an M241 controller. This controller interfaces with an industrial computer and a router via a switch...