userxyz Member U Join Date May 2002 Location any Posts 2,768 Feb 19, 2008 #1 As you can see I wrote I timer before the step (before JCN M042) In this step I now need to set something on a rising edge of this step 4. Can I write an edge detection before the step in the same way as my timer ? Maybe a tip of how I can do this
As you can see I wrote I timer before the step (before JCN M042) In this step I now need to set something on a rising edge of this step 4. Can I write an edge detection before the step in the same way as my timer ? Maybe a tip of how I can do this
userxyz Member OP U Join Date May 2002 Location any Posts 2,768 Feb 19, 2008 #2 Work Should This WOrk: M60.0 is my edge detection... will this code work outside the edge: A "FC303-" A "DB scherm1".stapknop R "DB aanvoer1".toestemming This is the code:
Work Should This WOrk: M60.0 is my edge detection... will this code work outside the edge: A "FC303-" A "DB scherm1".stapknop R "DB aanvoer1".toestemming This is the code:
manmeetvirdi Member M Join Date Oct 2004 Location India. Posts 750 Feb 19, 2008 #3 HI scan 1 if db80.dbx3.6 is true-->proceed and check status of db80.dbx0.0 If db80.dbx0.0 is FALSE then proceed (all code below m061 will be processed) scan 2 jump tp m062 ///////// removing the bit db80.dbx3.6 before jump instruction wont effect anything
HI scan 1 if db80.dbx3.6 is true-->proceed and check status of db80.dbx0.0 If db80.dbx0.0 is FALSE then proceed (all code below m061 will be processed) scan 2 jump tp m062 ///////// removing the bit db80.dbx3.6 before jump instruction wont effect anything