Hi all,
I have a powerflex 525 which I'll be using in VVC mode, and the manual says I should perform a rotate tune to use the drive in VVC mode. It also notes that the motor must be uncoupled from the load for this test, or the results may be invalid.
Just wanted to quickly sanity check - does that mean I have to uncouple the motor from the gearbox, or just uncouple the load from the motor-gearbox output shaft?
I have a powerflex 525 which I'll be using in VVC mode, and the manual says I should perform a rotate tune to use the drive in VVC mode. It also notes that the motor must be uncoupled from the load for this test, or the results may be invalid.
Just wanted to quickly sanity check - does that mean I have to uncouple the motor from the gearbox, or just uncouple the load from the motor-gearbox output shaft?