Hello we have a PF70 with these connections
1 - Stop/CF
2 - Start
3 - Enable
7 & 8 - jumper
9 - 24 Vcd
14 & 15 Analog input
sometimes (1 or twice per week) the drive is stopped and when its restarted it doesnt works, the displays show stopped, but the 216 parameter shows that the stop, start, and enable are 1, the 016 parameter shows the correct voltage.
I changed the relay, check the voltage and it seems everything is ok, could it be something wrong with the wiring?
im attaching the picture
Thanks so much in advance
1 - Stop/CF
2 - Start
3 - Enable
7 & 8 - jumper
9 - 24 Vcd
14 & 15 Analog input
sometimes (1 or twice per week) the drive is stopped and when its restarted it doesnt works, the displays show stopped, but the 216 parameter shows that the stop, start, and enable are 1, the 016 parameter shows the correct voltage.
I changed the relay, check the voltage and it seems everything is ok, could it be something wrong with the wiring?
im attaching the picture
Thanks so much in advance