stallone
Member
Hello All,
i am replacing 5 Powerlfex 700 drives, 20Bc015a0aynanco.
I uploaded/saved the parameters from the old drive to the HIM,
now when i go to save to the new drive, i get an error!
Config Code Mismatch, i get an option to abort or continue.
The old drive has firmware version 9.001 and the new one is ver 10.004.
ID the firmware an issue and if so can i change the new drive back to older firmware?
I only have the programs on the old drives and no other backups.
thank you in advance.
i am replacing 5 Powerlfex 700 drives, 20Bc015a0aynanco.
I uploaded/saved the parameters from the old drive to the HIM,
now when i go to save to the new drive, i get an error!
Config Code Mismatch, i get an option to abort or continue.
The old drive has firmware version 9.001 and the new one is ver 10.004.
ID the firmware an issue and if so can i change the new drive back to older firmware?
I only have the programs on the old drives and no other backups.
thank you in advance.