Problem in controlling PLC by using Pannel view plus 600

[Saurabh Dudhbade]

Hello sir,
I am using Allen Bradley Micrologix 1200 PLC and Pannel view plus 600. I have written my ladder logic and verified successfully. I wanted to control by pannel view. I have PC which has got only one serial port. So PLC is connected to PC via serial cable and Pannel view plus is connected to PC via ethernet cable. I have created GUI in factory talk view machine edition for pannel view. GUI is working properly in the software but when I am using pannel view it is not working. Please help me

 

[gclshortt]

http://www.plctalk.net/qanda/showthread.php?t=33589

http://www.plctalk.net/qanda/showthread.php?t=41908

http://www.plctalk.net/qanda/showthread.php?t=109656

The above threads may help you out. You must be sure that the IP addresses are set and the mask is the same on each of the units.

Regards,