TConnolly
Lifetime Supporting Member
I need to exchange some info with an enhanced PLC/5. The PLC/5 is linked via DH+ to a 1756 DHRIO module in slot 1 of a 4 slot 1756 chassis. The chassis also has a ENBT module in slot 0 to form a bridge to the plant network.
I've added some ethernet IO and drive to the system so I put a second ENBT module in slot 2 and in slot 4 is a L55 CLX processor, rev 16 (max rev for L55 processor).
The CLX is processing the ethernet IO and needs to exchange four 16 bit words with the PLC/5.
Is it possible to use produced/consumed tags over DH+ through the DHRIO module or am I going to have to message the info? I'm not seeing how to configure it over DH+.
I've added some ethernet IO and drive to the system so I put a second ENBT module in slot 2 and in slot 4 is a L55 CLX processor, rev 16 (max rev for L55 processor).
The CLX is processing the ethernet IO and needs to exchange four 16 bit words with the PLC/5.
Is it possible to use produced/consumed tags over DH+ through the DHRIO module or am I going to have to message the info? I'm not seeing how to configure it over DH+.
Last edited: