toddp65
Member
I'm trying to upload the program from a Proface HMI with a flash stick.
I went thru the procedure I read online and when go to upload it responds:
Failed to Start from USB storage
The flash drive is empty and formatted FAT. I've tried a couple different ones.
Has anyone any experience with this issue? The knowledge base online is sparse. This is our one and only Proface panel.
I went thru the procedure I read online and when go to upload it responds:
Failed to Start from USB storage
The flash drive is empty and formatted FAT. I've tried a couple different ones.
Has anyone any experience with this issue? The knowledge base online is sparse. This is our one and only Proface panel.