danielcr76
Member
I am connecting Proface ST401 to 1770-kf2 to PLC-5/15. The manual shows an incorrect cable diagram. I need a cable diagram that connects the 9 pin ST401 to the 25 pin 1770-KF2. Please help.
Proface ST401 to 1770-kf2 to PLC-5/15
- Thread starter danielcr76
- Start date
AnthonyF8:0
Member
Have you tried the cable diagram out? Just curious. I would send an email to [email protected]. They can defenitely help. I've rescently had a crash course in Proface's myself. I'm not familiar with the ST option. Another place you might find an answer is at http://www.pro-face.com/otasuke/download/#manual. Hope it helps.
Similar Topics
I am trying to make communication possible between the mitsubishi FX-2N and a proface HMI, ST401. all the other areas are working fine eg i can...
Im trying to setup the communication ports between a Proface ST401 AG41-24V and an AB micrologix 1500 (LSP 1764 series c).
First i made the...
Hello Engineers, Please help!!
I am trying to connect Proface unit ST401 HMI panel to a Micrologix 1500 CPU over its channel 2 port. Can anyone...
Gentlemen,
I have a Proface ST401 on which I must modify some recipe settings. I have the original file, but it does not match the one that is...
I'm trying to get an st401 hmi to communicate with a micrologix 1200. So far, i've only gotten "plc not responding." Im using DF1 half duplex...