AlfredoQuintero
Lifetime Supporting Member
Mark, thanks very much for this enlightening post. I managed to get my redundant Profinet system as expected. Thanks to you I am a little bit less ignorant today.
PROFINET MRP takes 5 seconds to recover from break
- Thread starter Mark Whitt
- Start date
Similar Topics
We are trying to configure redundant RX3I system with profinet ring (MRP). We have two PNS racks.
We were able to set the device names for the...
Hello
I have a s7-1200 and I would like to read the tags present in this controller with my controllogix controller. The two controllers don't use...
Hello Guys,
I want to establish profinet communication between siemens plc and my system using python programming. Which python lib can i use to...
I want to establish a Profinet network in my production plant to connect multiple devices, including a PLC, HMI, and multiple Profinet-based...
Hi,
I have a customer with a S7300 from around 2013 which they link to approx 25 inverters, 3 DP to DP converters and 5 IM153 remote I/O units...
