Programming the Festo MTR-DC1 servo with ControlLogix

[DaveWilson]

Hello everyone,

Does anyone out there have any sample programs on controlling the Festo MTR-DC1 servo using RSLogix5000 ver 17 or higher. Do they have a set of AOI's to use, anything like that?

Thanks for any help you can provide.

Dave

 

[ason]

I think that it should be MTR-DCI and not MTR-DC1

Im not a AB guy,
So i dont know if this is the right FB for U,
But it says that it´s for RSLogix5000
http://www.festo.com/net/sv_se/SupportPortal/default.aspx?q=MTR-DCI&tab=5&s=t

 

[widelto]

It has devicenet, so it must be easy to implement:
go to: http://www.festo.com/net/lv_lv/SupportPortal/default.aspx?q=devicenet&tab=2
Look for eds files on festo page for this unit, and probably you will find examples.