Promag 400 Failure!!! Help Please!!!

adrirock1141

Member
A
Join Date
Mar 2022
Location
La paz
Posts
10
Hello Everyone, i Have im my Industry a Endress & Hauser Promag400
this has a screen that constantly have that error, it says to wait, somebody knows what can i do?
I try to connect and reconnect the flowmeter, but doesnot work

Thank you all for your time!!!!

Imagen de WhatsApp 2024-01-16 a las 22.51.37_321b8d39.jpg Imagen de WhatsApp 2024-01-16 a las 22.51.44_9e860eb8.jpg
 

Similar Topics

A
Promag W 400 cant connect to Rslogix5000
Hello Everyone i got a problem with Endress Hauser FlowMeter Promag W400, in his specification says it support Ethernet/IP protocol...
Replies
4
Views
1,815
AlfredoQuintero
A
L
Endress Hauser Promag W 400 Connection Problems
Hi all, I am adding an endress hauser promag w 400 into a plant wide monitoring system. It is a CompactLogix RS5000 system. It seemed easy to add...
2
Replies
16
Views
11,400
PUSHPENDRA SINGH
P
K
Configuring Stratix 5400 to connect to a Stratix 5700
Greetings, I had an issue with a RIO rack 2 and IFM I/O Link dropping on my network. I would loose connection for a second or 2 then they would...
Replies
3
Views
93
harryting
H
K
B&R POWR PANEL 400
I HAVE B&R POWEL PANEL 400 HMI. THE ISSUE IS HMI NOT BOOTING, DISPLY SHOWING CONTIUESLY (ATTEMPTING TO A BOOT HARD DRIVE....)
Replies
1
Views
61
collinsd70
C
andyvanosdol
Keyence SR-X300 to Micrologix 1400
Hey all, first time poster here. I am wondering if anyone has tried using a Keyence SR-X300 barcode scanner to a Micrologix 1400. Keyence sent...
Replies
0
Views
91
andyvanosdol
andyvanosdol
Back
Top Bottom