Hello!
I have a signal converter, reference PEM - 020 - G24 , which converts a signal of 0-10 V to a current signal that goes to a proportional hydraulic valve.
I have measured the current at 0 % and I have 500mA , 1200mA when I have 100 % .
The converter has three potentiometers , Im , Ib and Is. Anyone point me the function of each ? I already know that Ib is base current, Is is step current and Im is the maximum current. Is there any tutorial in how can I regulate it?
Photo of the system :
https://meocloud.pt/link/0d6f9360-50ac-4214-b2d2-11f8d00c407a/20140715_214142.jpg/
Thank you.
I have a signal converter, reference PEM - 020 - G24 , which converts a signal of 0-10 V to a current signal that goes to a proportional hydraulic valve.
I have measured the current at 0 % and I have 500mA , 1200mA when I have 100 % .
The converter has three potentiometers , Im , Ib and Is. Anyone point me the function of each ? I already know that Ib is base current, Is is step current and Im is the maximum current. Is there any tutorial in how can I regulate it?
Photo of the system :
https://meocloud.pt/link/0d6f9360-50ac-4214-b2d2-11f8d00c407a/20140715_214142.jpg/
Thank you.