ProTalk P2 ethernet to L33ER Compact

DustinG

Member
D
Join Date
Nov 2019
Location
Brooks
Posts
1
Hi all, Im having issues connecting a CompactLogix L33ER using Ethernet to a ProTalk P2 callout unit. From everything I found online I seem to have all the settings right but I just get a faulted Ethernet module in my Studio5000 I/O tree. Rockwell doesn't have much to say as the ProTalk is not a supported module of theirs and Barnett Engineering who makes ProTalk is running out of ideas. Just wondering if anybody has anything for me to try?

Thanks
 

Similar Topics

A
reading data from siemens controller (profinet) to ethernet/IP controller
Hello I have a s7-1200 and I would like to read the tags present in this controller with my controllogix controller. The two controllers don't use...
Replies
5
Views
176
bkottaras
B
K
use Simotion D ethernet port as gate to access S7-1500 plc program
Can we use a Simotion D455 ethernet port x127 as a gate, to access S7-1500 plc Tia Portal program ? In the Simatic manager, we used Netpro to do...
Replies
2
Views
94
mk42
M
S
Powerflex 755 - Hardwired & Ethernet in Parallel
So I have a sort of unique situation where I'm wanting to run a PF755 from the IO and over ethernet. Of course, this comes with it's own set of...
Replies
9
Views
305
sparkie
S
afm
Ethernet Dongles for PC-to-PLC connection?
Hi all, My ethernet port on my laptop recently broke and I was hoping to just use a usb-c dongle in the mean time to go live on my PLC until I...
Replies
14
Views
465
JesperMP
JesperMP
A
Ethernet comm problem with PLC when inverter enables.
Hi; In a cabinet of a machine, a Fatek PLC with an Ethernet communication card is working. In the same cabinet, there is a 1 kW inverter. When...
2
Replies
16
Views
534
Gleichner33
G
Back
Top Bottom