JBradley
Member
So here is the scoop:
I've searched the threads high and low for info and i've come really really close.
My most recent findings:
""""""""""""""""""""""""""""""""""""""
Then depending on what PLC he is connecting too, he'll need a different cable.
Micro-1200 I believe he said:
Protocol PanelView Standard Comm Port
FROM:
RS-232 (DF1) Communication Port (9-pin)
PanelView 300 - 1400
2711-xxx16, 2711-xxx17
TO:
MicroLogix 1000, 1200,
1500LSP
CH0 (8-pin Mini DIN)
(DF1 or DH-485)
DF1
USE A:
2711-NC21 (16ft/5m)
2711-NC22 (49ft/15m)
(null modem not required)(1)
""""""""""""""""""""""""""""""""
Story:
My problem is pv300 (DF1) to ML 1100 (mini 8) communication. AB's tech support for our local area is stumped, and i mean stumped. I tried a pm-02 in conjunction with a gender bender null modem db9.. no dice. I then tried a home made db9 gender bender with pins 2& 3 Crossed, no dice either! I then found post and called about the 2711-nc21 and they said it was 30 days from being to us. I've got a deadline of 2 days to get these pumps working with this new plc and panelview.
Question:
What is the pin config of the 2711-NC21
Thanks!
Josh
I've searched the threads high and low for info and i've come really really close.
My most recent findings:
""""""""""""""""""""""""""""""""""""""
Then depending on what PLC he is connecting too, he'll need a different cable.
Micro-1200 I believe he said:
Protocol PanelView Standard Comm Port
FROM:
RS-232 (DF1) Communication Port (9-pin)
PanelView 300 - 1400
2711-xxx16, 2711-xxx17
TO:
MicroLogix 1000, 1200,
1500LSP
CH0 (8-pin Mini DIN)
(DF1 or DH-485)
DF1
USE A:
2711-NC21 (16ft/5m)
2711-NC22 (49ft/15m)
(null modem not required)(1)
""""""""""""""""""""""""""""""""
Story:
My problem is pv300 (DF1) to ML 1100 (mini 8) communication. AB's tech support for our local area is stumped, and i mean stumped. I tried a pm-02 in conjunction with a gender bender null modem db9.. no dice. I then tried a home made db9 gender bender with pins 2& 3 Crossed, no dice either! I then found post and called about the 2711-nc21 and they said it was 30 days from being to us. I've got a deadline of 2 days to get these pumps working with this new plc and panelview.
Question:
What is the pin config of the 2711-NC21
Thanks!
Josh