Hi,
I have a project using a panel view plus 1000 communicating using kepware over Modbus RTU serial. Initially I was getting a com1 OS 12 error and I suspected it was to do with Rslinx Enterprise fighting over the com port so I tried to disable it but I could not find any way to disable the DF1 comms. In the end I changed the DF1 comms setting in the terminal config to use com 2 and that getts everything working except for that it keeps popping up a message saying it can't use com2 for DF1.
So I need to disable the DF1 driver. How do I do this? If i look at the terminal network settings I can see the driver and it has no devices listed. I cannot see a way to remove or disable the driver. Also in my project under rslinx comms the runtime has no DF1 driver either. I assume I am missing something here?
Thanks.
I have a project using a panel view plus 1000 communicating using kepware over Modbus RTU serial. Initially I was getting a com1 OS 12 error and I suspected it was to do with Rslinx Enterprise fighting over the com port so I tried to disable it but I could not find any way to disable the DF1 comms. In the end I changed the DF1 comms setting in the terminal config to use com 2 and that getts everything working except for that it keeps popping up a message saying it can't use com2 for DF1.
So I need to disable the DF1 driver. How do I do this? If i look at the terminal network settings I can see the driver and it has no devices listed. I cannot see a way to remove or disable the driver. Also in my project under rslinx comms the runtime has no DF1 driver either. I assume I am missing something here?
Thanks.