halburgepramod
Member
- Join Date
- Jun 2005
- Posts
- 54
Hello Friends,
I have PV+ 1000 HMI programmed by someone. I donot have .med/.apa/.mer files with me. I am trying to upload the .mer file from HMI and desire to convert back to .med file. This is because the HMI is presently connected to L62 Processor on serial port but is not showing any values on process graphics indicating that it is not talking with PLC.
So we are trying to make this communication healthy.
This HMI has Ethernet port as well. So I changed the IP address of this HMI to match with Plant Network i.e. 192.168.5.73. After changing I did reset the power of this HMI so that this new IP change take effect.
Now, when I ping from my PC then the relpy from HMI is successful.
But I cannot see the HMI in RSLinx Enterprise so that I can upload the program. Even I connected crossover cable from HMI to Laptop, ping is good but cannot see in RSLinx Enterprise.
Even if I connect NC13 cable for Serial port connection to upload, the device cannot be seen in RSLinx Enterprise.
I am not sure what I am missing.
Could you guys please help me out to resolve this issue?
Appreciate all help in advance.
Best Regards,
Pramod
I have PV+ 1000 HMI programmed by someone. I donot have .med/.apa/.mer files with me. I am trying to upload the .mer file from HMI and desire to convert back to .med file. This is because the HMI is presently connected to L62 Processor on serial port but is not showing any values on process graphics indicating that it is not talking with PLC.
So we are trying to make this communication healthy.
This HMI has Ethernet port as well. So I changed the IP address of this HMI to match with Plant Network i.e. 192.168.5.73. After changing I did reset the power of this HMI so that this new IP change take effect.
Now, when I ping from my PC then the relpy from HMI is successful.
But I cannot see the HMI in RSLinx Enterprise so that I can upload the program. Even I connected crossover cable from HMI to Laptop, ping is good but cannot see in RSLinx Enterprise.
Even if I connect NC13 cable for Serial port connection to upload, the device cannot be seen in RSLinx Enterprise.
I am not sure what I am missing.
Could you guys please help me out to resolve this issue?
Appreciate all help in advance.
Best Regards,
Pramod