Hello all,
I'm new to wonderware so please bear with me,
I'm currently working on InTouch 9.5 and I wanted to know how I can do a Horizontal fill with a scale that are both dynamic (another object), meaning if I have a max SP, min SP and SP , It should be able to adjust the scale and show the value depending on what the tag values are.
In my case, Min usually is negative value and max is positive ~ -10 to + 10 and my setpoint would be in the middle say, 5. The scale and fill should adjust to -10 to 10 and show my setpoint at 5. This is because these values keep changing in the PLC.
Your help is appreciated.
Thank you
I'm new to wonderware so please bear with me,
I'm currently working on InTouch 9.5 and I wanted to know how I can do a Horizontal fill with a scale that are both dynamic (another object), meaning if I have a max SP, min SP and SP , It should be able to adjust the scale and show the value depending on what the tag values are.
In my case, Min usually is negative value and max is positive ~ -10 to + 10 and my setpoint would be in the middle say, 5. The scale and fill should adjust to -10 to 10 and show my setpoint at 5. This is because these values keep changing in the PLC.
Your help is appreciated.
Thank you