question
- Thread starter Dorin
- Start date
I believe it is a program for converting files to pdf format.
It is good for avoiding paying for the overpriced acrobat software when all you want to do is print to PDF.
Personally, I use a piece of software called "PDF Creator". It is completely open source, and works quite well. I use this because I found out about it before I became aware of 955pdf, and haven't had any reason to change.
It is good for avoiding paying for the overpriced acrobat software when all you want to do is print to PDF.
Personally, I use a piece of software called "PDF Creator". It is completely open source, and works quite well. I use this because I found out about it before I became aware of 955pdf, and haven't had any reason to change.
Last edited:
elevmike
Member
Go to www.pdf995.com and read all about it. That what I use. Works great.
Goody
Member
I concur with all thats been said.
It is great for putting the plc program on a cd in PDF format.
You can also put adobe acrobat on the same disk so that anyone can read and see the program without having to have the plc software.
It is great for putting the plc program on a cd in PDF format.
You can also put adobe acrobat on the same disk so that anyone can read and see the program without having to have the plc software.
Similar Topics
I have a 120V relay, 120V DI card and a analog input. I was wanting to know if i could put a 24V DI and well as a 120V DI card on the same plc...
Hello again..trying something on an existing poorly written program and just wanted to double check something
system is an A-B MicroLogix 1200
In...
Good morning!
Let me start by saying, I am still learning about this type of HMI programming. I recently watched a video about recipes and how it...
I have some logic that I have written within a 5380 series controller that tracks the time an event is started, while the event is running an RTO...
I have an HMI 2711R - T4T Series B, and I want to know which PLCs, besides Micro 820, can communicate with it.