quick help with slc 5/04 OSR

I hit OTL when I was typing instead of OTU on the second rung. My bad.
All it needs to be is
XIC Up_to_Speed equ Spd_Ref 0 OTU Up_to_Speed
 
The OSR was one of the hardest hurdels i encountered when going from Modicon to AB..I still dont undrestand fully but can make it work.. With Modicon you have a [P] and a [N] contact in the software.. The P is for postive transition and the N is for negitive..much easier that AB's OSR and OSF..
 

Similar Topics

Hello all I need to connect an Allen Bradley SLC 5/03 (1747-L531) to an AIC+ (1761) (now connected from the PLC to port 2 on the AIC+ ) to...
Replies
0
Views
2,997
So the quick and short of the situation is that I designed an axle press that was sent to one of my company's other facilities. That facility just...
Replies
19
Views
4,290
Q(1) Design a controlling system using DVP-40ES Delta PLC for a threestory Elevator Prototype as shown in the figure below. Show in details the...
Replies
4
Views
2,175
Could somebody please help me with this quick question? The input range from an analogue sensor is unsuitable. What would you do, from a safety...
Replies
17
Views
3,110
hi every one :- i need to exapline with example for :- 1- TTL input modules 2- BCD input modules
Replies
3
Views
1,497
Back
Top Bottom