MikeS
Member
Got a simple one that I forgot how to do......old age kicking in. I'm using a SLC 5/03... I have a hyd ram that needs to cycle back and forth all day long....I'm stuck with using a common pressure switch to tell it to stop and reverse the stroke.
When the ram bottoms out and the hyd. pressure rises, it sends a signal to the plc to change direction.
In the old days it was a ratching relay that did the trick.
Any help would appreciated.
Thanks.
When the ram bottoms out and the hyd. pressure rises, it sends a signal to the plc to change direction.
In the old days it was a ratching relay that did the trick.
Any help would appreciated.
Thanks.