Hi every one,
I know this may sound pretty basic for some of you but I'm absolutly new to the intellution Fix 7.0 "SCADA". The software is runing on a Win 2000 machine. The question is I need to re-configure the range(or the scale) of a flow meter from 0-300 NH\L to 0-900 NH\L. I assume I need to do the same at the PLC level probably via the SCADA.
Can any one walk me though this exercise in step-by-step?
Thanks in advance.
I know this may sound pretty basic for some of you but I'm absolutly new to the intellution Fix 7.0 "SCADA". The software is runing on a Win 2000 machine. The question is I need to re-configure the range(or the scale) of a flow meter from 0-300 NH\L to 0-900 NH\L. I assume I need to do the same at the PLC level probably via the SCADA.
Can any one walk me though this exercise in step-by-step?
Thanks in advance.