uptown47
Lifetime Supporting Member
Hi all,
I'm trying to read the current output from an inverter into the PLC.
The inverter has an analogue output configured for current.
I've got spare analogue inputs at the PLC.
Can I just connect the two together and then do some form of scaling in the PLC?
What's the best way to do this?
Thanks
I'm trying to read the current output from an inverter into the PLC.
The inverter has an analogue output configured for current.
I've got spare analogue inputs at the PLC.
Can I just connect the two together and then do some form of scaling in the PLC?
What's the best way to do this?
Thanks