I need to read temperature from an OEM device.
OEM device has an RS232 port which is connected to a 1766-NC01 (to micrologix)
(I have no coding anything yet in RSLogix 500, just try to configuration first)
I did a ASCII configuration but seem like I dont see anything:
Echo Character Count =0
Received Character Count =0
Bad Character Count =1
Do I miss something here !?
Thanks
OEM device has an RS232 port which is connected to a 1766-NC01 (to micrologix)
(I have no coding anything yet in RSLogix 500, just try to configuration first)
I did a ASCII configuration but seem like I dont see anything:
Echo Character Count =0
Received Character Count =0
Bad Character Count =1
Do I miss something here !?
Thanks