avec21
Member
Hi all,
Im trying to use a timer based output ( using the Real time clock of the Fx3u).
I used citect 7.2 to visualize.
If the input data is equal to the realtime data, the output is set.
That works, the output goes on. But aprox. every 10 sec. it goes quickly off and on again.
It looks like it has some kind of refresh delay.
Anyone a solution?
Im trying to use a timer based output ( using the Real time clock of the Fx3u).
I used citect 7.2 to visualize.
If the input data is equal to the realtime data, the output is set.
That works, the output goes on. But aprox. every 10 sec. it goes quickly off and on again.
It looks like it has some kind of refresh delay.
Anyone a solution?