Tsmith1823
Member
Im using the red lion cub5 for the RPM of a motor. I was wanting to see if it was possible to get the data from the meter to a allenn bradley PLC.
Red lion cub5 to AB PLC
- Thread starter Tsmith1823
- Start date
joseph_e2
Member
It looks like they have communication option cards that add RS485 or RS232. Not sure what AB PLC you're using or if it supports those connections or what protocol it actually uses. It may be time to upgrade your CUB.
OkiePC
Lifetime Supporting Member
I think the CUB5 uses ASCII on its serial port if you have the serial option module.
Tsmith1823
Member
OP
Awesome. Thanks
Similar Topics
I've got an encoder hooked up to a CUB5 and want to communicate with it from a G306A via RS232. I made two cables with pinouts per the G306A and...
Hello!
Does anyone have a listing of the un-documented setup commands for the CUB5 series meters?
I'm trying to write a pc based program that...
Trying to get this thing to COUNT.
Just a simple count, no math or anything.
I want it to increment on an output from a Siemens 305 PLC.
I tried...
While they came up quickly with a fix for the alarm date issue quickly I will have to drive around for a week or so, burning up a lot of fuel...
From the Red Lion website, after some customer enquiries in the last week or so...
Rev. March 25, 2024 [18:30]
Just thought it might help a...