renovation hmi with factory talk

[hadi hosseini]

Hi all
I want renovate an old automation system.it have two plc . esd and f&g plc.
Plcs are allen bradly plc 5.
The old network is dh+ rs232. My owner want to have an ethernet network.
Two work station and one enginner station. HMI shall be factorytalk.
How can i do it.
Best regard

 

[danatomega]

So you have (3) PLC's - (2) are AB and (1) F&G. Do any of the PLC's already have Ethernet modules? If not, you will need to obtain them and install them.
Then, you need (3) PC's for the Factorytalk HMI's - (2) are workstations and (1) Engineer Station?

 

[hadi hosseini]

I have 2 plc one esd and another f&g.the plcs havenot ethernet module. My owner want ethernet network on HHI level.
Thanks

 

[danatomega]

Sorry, I read the line that sais PLCs are allen bradley plc 5 and thought that's what you have... So, none of your PLC's are AB?

Hi all
I want renovate an old automation system.it have two plc . esd and f&g plc.
Plcs are allen bradly plc 5.

You will still need to ensure you have Ethernet modules or Ethernet connections on the PLC's in order to make this work.

 

[hadi hosseini]

Two plcs have DH+ network. And convert to RS232 with a converter.
Then goes to switches. i want ethernet network after switch.
I want requare hardware and software for this means.
What kind of factorytalk component is necesary in operation and eginner station ?
How can i read and write tags?
Thanks.
Excuse me i am beginer in english language and this plc
type

 

[osmanmom]

How can i read and write tags?

my advise to you -

request to your management that you need a PLC training.