Rievtech PLC/HMI tags

auto123

Member
A
Join Date
Jun 2020
Location
port louis
Posts
4
Hello Everyone,

Anyone familiar with Rievtech PLC programming?

Can you guys please explain how to create tags on HMI and link it to the PLC (Through Ethernet). i just want turn ON a physical output on the PLC from my HMI.

Communication between the two is working fine. Just having a hard time creating the tags. can't find out how to do the addressing.

Grateful if someone can help!

Thanks guys
 

Similar Topics

C
0-20mV Loadcell with 2080-TC card Micro850 PLC
Hi everyone. I'm trying to read values from a Loadcell with a 2080-TC card. I know the 2080-TC is a thermocouple card but it reads millivolts that...
Replies
4
Views
63
chikhim
C
P
Looking for a personal PLC tutor, should I post in the PLC job ad section
Hello All, Please direct me to post to the right page. I am really new to PLC, and want to find a tutor who is familiar with Automation Direct's...
Replies
3
Views
65
Levi G
L
M
Omron plc backwards compatibility
I've come across a system running omeron cx-programmer version 9.42. Am I going to need to find a legacy version of the software to edit and...
Replies
1
Views
45
IO_Rack
IO_Rack
T
Anyone here work for Johnson Controls now or in the past?...need help with OLD PLC program
I have an old Sentry Palletizer (S/O Number 3007 / Serial Number 1172) that has lost its program as the backup battery died years ago. I can...
Replies
0
Views
86
TheCaptain2000
T
P
SOFTWARE TIA PORTAL V14 - PLC SIEMENS
Hello, good morning, I have been having two problems with the Tia Portal software. The first is that I have installed it on my computer and...
Replies
3
Views
87
AlfredoQuintero
A
Back
Top Bottom