Rievteh PLC to HMI communication via Ethernet

auto123

Member
A
Join Date
Jun 2020
Location
port louis
Posts
4
Hello Everyone!

I am new to PLC systems.

I'm trying to connect a Rievtech PLC to a Rievtech HMI directly through Ethernet communication. After setting IP addresses on both sides, I am having 'Communication Timeout' message on the HMI.

PLC: Rievtech PR-26DC-DAI-RA-N
HMI: Rievtech RTS6070WE

IP Addresses:
HMI- 192.168.100.20
PLC- 192.168.100.10
Subnet - 255.255.255.0 on both side

Anyone familiar with this PLC brand can guide me through this please. Thank you.
 

Similar Topics

L
Beckhoff IPC and Controllogix PLC
I'm trying to integrate a Beckhoff IPC with a Controllogix PLC. There is some documentation, on the Beckhoff website, on how to do a PLC-PLC comms...
Replies
0
Views
21
lcabal27
L
S
Tia 15.1 can't upload a plc
kindly need to understand why can't upload the plc
Replies
2
Views
52
Some one
S
Z
PLC CPU Unit Upgrade
Hello all, I have a one problem. I would like to upgrade Mitsubishi PLC Q02 to Q03UDVCPU. I have Q02 program and I change to PLC type and try to...
Replies
3
Views
55
parky
P
S
Siemens PLC Main Disconnect Trip
The past week we received a new piece of equipment from Germany which utilizes siemens controls. Typically in our company we use A.B. controls for...
Replies
9
Views
256
mburtis
M
N
Conveyor PLC
the conveyor can stop because of a safety sensor or safety switch. And also it can stop because of an object jam detector sensor. If the conveyor...
Replies
5
Views
197
geniusintraining
geniusintraining
Back
Top Bottom