Rievteh PLC to HMI communication via Ethernet

auto123

Member
A
Join Date
Jun 2020
Location
port louis
Posts
4
Hello Everyone!

I am new to PLC systems.

I'm trying to connect a Rievtech PLC to a Rievtech HMI directly through Ethernet communication. After setting IP addresses on both sides, I am having 'Communication Timeout' message on the HMI.

PLC: Rievtech PR-26DC-DAI-RA-N
HMI: Rievtech RTS6070WE

IP Addresses:
HMI- 192.168.100.20
PLC- 192.168.100.10
Subnet - 255.255.255.0 on both side

Anyone familiar with this PLC brand can guide me through this please. Thank you.
 

Similar Topics

S
Intermittant plc freeze issue.
Hi all smart and knowledgeable people.I have a hmi connected to 2 Plcs via ethernet.These 2 Plcs connected to control 2 systems in one machine...
Replies
2
Views
81
geniusintraining
geniusintraining
S
How to read the configuration of the AB 1769 L33ER PLC by CIP protocol , using socket without Studio 5000 or Logix5000
Hello, We are now working on a software to collet the configuration of different PLC brands ,using a third software to backup all the simens...
Replies
1
Views
64
jstolaruk
J
A
AB PLC-5/10 and NT-1776-HSD-R
Dear Experts, I've come across an unusual piece of hardware for AB PLC-5 racks. I mean the NT-1776-HSD-R resolver input module. I have tried...
Replies
0
Views
39
AK5fa
A
J
Small cheap PLC or smart relay with one analog input sensor?
Hi looking to install a smaller less sophisticated PLC for fountain timing and also one analog pressure sensor which would be used to detect...
Replies
12
Views
202
geniusintraining
geniusintraining
Christoph
Slightly off topic But is PLC related, sorta!
Hello all. I recently had to re install my AutoCAD Electrical 2024. I am trying to find the Rockwell catalog to install in it but cant find...
Replies
0
Views
98
Christoph
Christoph
Back
Top Bottom